For a 230V power supply from a 12V electricity production, we recommend the use of a SINUS PUR converter for inductive, sensitive or high current devices at start-up (fridge / freezer, pump, machine washing machines, plasma or LCD screens, computers, measuring equipment, etc.)
To determine the power of your converter: the sum of the powers of the devices connected to the converter must imperatively be lower than the power of the converter.
Check our tips to refine your choice of a converter.
SINUS PUR are also available in 24V Converter or 48V Converter
This VICTRON Energy converter belongs to the PHOENIX range, which represents the small pure-sine converters with the best quality / price ratio on the market.
The output is excellent around 90% and it is suitable for any type of battery. It is therefore the essential instrument of conversion for a photovoltaic or wind turbine system.
The Victron Phoenix 12/250 converter is recommended for a battery with a capacity greater than 90Ah to provide enough power to the converter.
High quality, manufactured by the world leader VICTRON (Netherlands)
Rated power: 250 VA (200 watts)
Fully configurable:
- Reset levels and alarm triggering in case of low battery voltage
- Restart and shutdown levels in case of low battery voltage
- Output voltage 210 - 245V
- 50 Hz or 60 Hz output frequency
- ECO mode detection level and ECO mode switching on / off
The VE.Direct port can be connected to:
- A computer (VE.Direct-USB interface cable required).
- Apple and Android smartphones, tablets and other devices (a Bluetooth Smart communicating with VE.Direct is required).
Available in 12V, 24V and 48V (see corresponding range)
Cables not supplied
Warranty: 5 years
Manufacturer: Victron (Netherlands)
Reference: PIN122510200
VICTRON PHOENIX converters offer exceptional performance: exceptional efficiency (up to 92% of the converted power), high peak power (to cope with an occasional over-demand of energy, when certain electrical devices start) and very strong electrical signal pure and perfectly constant.
We recommend these converters for solar installations for small residential or holiday homes, rural electrification, mobile use on yachts or in motorhomes.
They may also be used in commercial vehicles or for stationary industrial use (radiocommunication and measurement stations or telecommunication devices).
We recommend that you do not connect the converter to the solar controller (consumer output), as the regulator's power rating is usually much higher than the maximum output amperage of the controller.
A Victron converter plugs into the battery (s), there is no danger of deep discharge because this type of converter detects when the battery voltage is too low.
For advice on sizing or information, please contact infos@gbsolar-es.cd / infosgbsolar@gmail.com
Please contact infos@gbsolar-es.cd / infosgbsolar@gmail.com >
Choosing the right battery for optimal installation In order to better choose the battery needed for your installation, consult our solar energy storage battery and solar battery: capacity and life, which will give you valuable information regarding the type of battery to choose or the capacity of your installation.
Connect your batteries safely
Before connecting your batteries, please consult our sheets Advice for use and safety instructions.
Solar panel
Converter
Regulator
Battery
Charger
Lighting
